Giving this thing a short shakedown run before the Epic Six Border Crossing Day Trip to Hell and Back #esbc #roadTrip #r1 #yamaha
Posted via my Tumblr account. See the original post, or follow me.
Giving this thing a short shakedown run before the Epic Six...
Posted via my Tumblr account. See the original post, or follow me.
New leather band for my @getpebble with yellow stitching,...
New leather band for my @getpebble with yellow stitching, getting all #docMartins and matching my @gadgetwraps skin.
Posted via my Tumblr account. See the original post, or follow me.
That should help keep the mud outa the shock… #r1 #yamaha...
That should help keep the mud outa the shock… #r1 #yamaha #DIY #builtNotBought
Posted via my Tumblr account. See the original post, or follow me.
Fibre glass portion needs sanding and a couple of coats, but...
Fibre glass portion needs sanding and a couple of coats, but it’s basically finished. #DIY #yamaha #r1 #builtNotBought
Posted via my Tumblr account. See the original post, or follow me.
Some fine tweaking left, but it’s fitting up nice and...
Some fine tweaking left, but it’s fitting up nice and looks tidy. Completely from scratch. #r1 #motorcycle #motorbike #DIY
Posted via my Tumblr account. See the original post, or follow me.
Believe it or not, this is clean… I’ve always tried...
Believe it or not, this is clean… I’ve always tried to protect the timber from welding burns, but I think it’s time to just let go!
Posted via my Tumblr account. See the original post, or follow me.
The IT department urinals look just like our sinks, and their...
The IT department urinals look just like our sinks, and their sinks look just like our urinals. #weirdos
Posted via my Tumblr account. See the original post, or follow me.
1972 Volkswagen 1600 Deluxe Type 3
1972 Volkswagen 1600 Deluxe Type 3:
Posted via my Tumblr account. See the original post, or follow me.
Type 3 Deluxe Sedan 2dr Man 4sp 1600 [Rel. Mar]
Someone buy me this original Notch.
Posted via my Tumblr account. See the original post, or follow me.
Oh, it’s on like Donkey Kong now! #motogp #marquez...
Oh, it’s on like Donkey Kong now! #motogp #marquez #lorenzo
Posted via my Tumblr account. See the original post, or follow me.
#hisNhers now we can tell our @getpebble apart thanks to...
#hisNhers now we can tell our @getpebble apart thanks to @getGadgetWraps
Posted via my Tumblr account. See the original post, or follow me.
Got some @getGadgetWraps love for my @getpebble today…
Got some @getGadgetWraps love for my @getpebble today…
Posted via my Tumblr account. See the original post, or follow me.
It’s on the calendar now… No backing out. #roadTrip
It’s on the calendar now… No backing out. #roadTrip
I have been planning this trip for a while... about 600km is going to take a full day and it's almost entirely twisty back roads, very little highway, very little residential.
Should be awesome and tiring all at once.
I owned an MC21 NSR250… back when I was 65kg. That bike...
I owned an MC21 NSR250… back when I was 65kg. That bike really taught me how to ride.
Fixed. Cut out the old pin, welded a bolt, fitted a bush. Add...
After this failure on my wife's BF Falcon gear selector, I decided it better to fix the design than just replace the parts with expensive factory replacements.
Fixed. Cut out the old pin, welded a bolt, fitted a sleeve. Add washers for effect.
Here's what I did:
I removed the selector arm, ground the back of the riveted pin with a flap disc, and punched the pin out. That left a hole.
I used a small diameter bolt and a 6.5mm OD sleeve to protect the plastic bush from the thread of the bolt.
I welded the head of the bolt to the arm on the back side so it won't ever move. I used a nut on the as a spacer on the inside. Against the nut on the inside is the large mud flap washer, and the inside hole of that washer has a large enough diameter to fit over the sleeve such that it can rotate freely and minimise the rub wear on the plastic part.
The flogged out bush didn't quite fit over the 6.5mm sleeve, so I cleaned out the inside of the bush with a 6.5mm drill. It's very soft material so I did this by simply holding the drill bit in my hand, turning it with my fingers.
Outside the bush are two washers, the first has an inside diameter just big enough to fit over the sleeve and it's purpose is the same as the large mud flap washer... it can move freely and prevents rub wear. The second washer fits snug on the thread of the bolt. The nut is torqued up to the washer which in turn holds the sleeve tight. In this way, the plastic bush moves on the stationary sleeve. Nut has locktite applied for security.
Almost imperceptible in the picture is that the plastic cable-end does not line up directly at 90 degrees to the bolt, so the sleeve and bolt assembly is about 3mm longer than the hole in the bush to allow some angular tolerance and minimised rub wear.
This entire repair took me under 40 minutes to complete and cost me just some odds and sods from my gash drawer. Also, my wife now has an appreciation why I keep all this so-called junk.
Fixed. Cut out the old pin, welded a bolt, fitted a sleeve. Add washers for effect.
Here's what I did:
I removed the selector arm, ground the back of the riveted pin with a flap disc, and punched the pin out. That left a hole.
I used a small diameter bolt and a 6.5mm OD sleeve to protect the plastic bush from the thread of the bolt.
I welded the head of the bolt to the arm on the back side so it won't ever move. I used a nut on the as a spacer on the inside. Against the nut on the inside is the large mud flap washer, and the inside hole of that washer has a large enough diameter to fit over the sleeve such that it can rotate freely and minimise the rub wear on the plastic part.
The flogged out bush didn't quite fit over the 6.5mm sleeve, so I cleaned out the inside of the bush with a 6.5mm drill. It's very soft material so I did this by simply holding the drill bit in my hand, turning it with my fingers.
Outside the bush are two washers, the first has an inside diameter just big enough to fit over the sleeve and it's purpose is the same as the large mud flap washer... it can move freely and prevents rub wear. The second washer fits snug on the thread of the bolt. The nut is torqued up to the washer which in turn holds the sleeve tight. In this way, the plastic bush moves on the stationary sleeve. Nut has locktite applied for security.
Almost imperceptible in the picture is that the plastic cable-end does not line up directly at 90 degrees to the bolt, so the sleeve and bolt assembly is about 3mm longer than the hole in the bush to allow some angular tolerance and minimised rub wear.
This entire repair took me under 40 minutes to complete and cost me just some odds and sods from my gash drawer. Also, my wife now has an appreciation why I keep all this so-called junk.
Ford BF Falcon Shift Link Cable Failure
My wife went to drive her Ford BF Falcon but the gearbox wasn't working.
The gear selector or 'T-bar' was moving very freely, but the dash indicator was stuck on neutral.
Jacking the car up and a quick look revealed this:
Doesn’t look right?!?!
The black plastic thing with the hole in it is the end of the shift linkage cable, it would narmally be pressed onto the pin at the top of the shift arm. The black plastic unit attached to the gearbox is the shift switch. Moving the 'T-bar' inside the car moves the cable, the cable moves the shift arm, the shift arm is mounted through the shift switch and the switch is what tells the gearbox/engine ECU what position the gearbox is in.
The white plastic bush is flogged out, and while putting it back onto the pin meant the gearbox works as expected, it's obviously not going to stay in place.
Obviously, to fix the problem correctly, the entire shift linkage cable needs replacement. This involves some disassembly of the interior console, the cable goes through the firewall and loops back to the gearbox. Once fitted, the cable requires adjustment, and of course the usualy story of re-assembly.
Also, someone mentioned the cable is a $150 genuine part from the dealer.
Upon considering the design, I decided there is probably a more reliable solution...
Here's what I did...
The gear selector or 'T-bar' was moving very freely, but the dash indicator was stuck on neutral.
Jacking the car up and a quick look revealed this:
Doesn’t look right?!?!
The black plastic thing with the hole in it is the end of the shift linkage cable, it would narmally be pressed onto the pin at the top of the shift arm. The black plastic unit attached to the gearbox is the shift switch. Moving the 'T-bar' inside the car moves the cable, the cable moves the shift arm, the shift arm is mounted through the shift switch and the switch is what tells the gearbox/engine ECU what position the gearbox is in.
The white plastic bush is flogged out, and while putting it back onto the pin meant the gearbox works as expected, it's obviously not going to stay in place.
Obviously, to fix the problem correctly, the entire shift linkage cable needs replacement. This involves some disassembly of the interior console, the cable goes through the firewall and loops back to the gearbox. Once fitted, the cable requires adjustment, and of course the usualy story of re-assembly.
Also, someone mentioned the cable is a $150 genuine part from the dealer.
Upon considering the design, I decided there is probably a more reliable solution...
Here's what I did...
Cheap Chinese 'Portable' Static Wheel Balancer (eBay)
I bought this cheap chinese static wheel balancer... here's a quick review.
Subscribe to:
Posts (Atom)